Instruction Manual

If you want to delete a specific static route entry, check the ‘select’ box of the static route
entry you want to delete, then click ‘Delete Selected’ button. (You can select more than one
static route entries). If you want to delete all static route entries listed here, please click
‘Delete All’ button or you can also click ‘Reset’ button to unselect all static route entries.
When you finished with the settings in this page, you can click ‘Apply’ button to save
changes you made in this page, or you can click ‘Cancel’ to discard changes. After you click
‘Apply’ button, you’ll see the following messages:
Please click ‘Apply’ to save changes you made and restart the broadband router, this
requires about 30 seconds and the broadband router will stop responding (this is normal
and is not malfunction). You can reconnect to this broadband router and continue on other
settings later.