Instruction Manual

3-3-4 DMZ
Demilitarized Zone (DMZ) is a special area in your local network. This area resides in local
network, and all computers in this area uses private IP address, too. But these private IP
addresses are mapped to a certain Internet IP address, so other people on Internet can fully
access those computers in DMZ.
The DMZ setting page looks like this:
Here are descriptions of every setup items:
Item Name
Description
Enable DMZ
Check this box to enable DMZ function,
uncheck this box to disable DMZ function.
Public IP address
You can select ‘Dynamic IP’ or ‘Static IP’ here.
If you select ‘Dynamic IP’, you have to select an
Internet connection session from dropdown
menu; if you select ‘Static IP’, please input the
IP address that you want to map to a specific
private IP address.
Client PC IP address
Please input the private IP address that the
Internet IP address will be mapped to.
Type
Select the type of connection, TCP or UDP. If
you’re not sure, please select ‘Both’.
Port Range
Input the starting port number in the left field,
and input the ending port number in the right
field. If you only want to redirect a single port
number, just fill the port number in the left
field.
Comment
Please input any text to describe this mapping,