User Guide

The following table describes the parameters of this page:

Field

Description

Synchronize

time with

You can choose NTP Server automatically, PC’s Clock or

Manually.

Time Zone

Choose the time zone in which area you are from the drop-

down list.

Daylight

Saving

You can enable the daylight saving time.

NTP Server

Address

Set the NTP server manually.

5.7.3. Firmware

Choose Maintenance > Firmware, the page shown in the following figure

appears.

You can upgrade the firmware of the Router in this page. Make sure the

firmware you want to use is on the local hard drive of the computer. Click on

Browse to browse the local hard drive and locate the firmware to be used for

upgrade.