User Guide

85
5.7. Maintenance
In the navigation bar, click Maintenance. The Maintenance page that is
displayed contains Administration, Time Zone, Firmware, SysRestart and
Diagnostics.
5.7.1. Administration
Choose Maintenance > Administration, the page shown in the following
figure appears. There is only one account that can access the Web-
Management interface. The default account is "admin" and the password is
"admin" – the “admin” account has read/write access privilege. In this web
page, you can set new a password for “admin”.
The following table describes the parameters of this page:
Field
Description
New Password
Enter the password to which you want to change the old
password.
Confirm Password
Enter the new password again.
5.7.2. Time Zone
Choose Maintenance > Time Zone, the page shown in the following figure
appears.
The system time is the time used by the device for scheduling services. You
can manually set the time or connect to a NTP (Network Time Protocol)
server. If a NTP server is set, you will only need to set the time zone. If you
manually set the time, you may also set Daylight Saving dates and the system
time will automatically adjust on those dates.