User Guide

54
Select PPPoA/PPPoE in the ISP encapsulation if your ISP requires you to use
a PPPoE connection. This option is typically used for DSL services. Select
Dynamic PPPoE to obtain an IP address automatically for your PPPoE
connection. Select Static PPPoE to use a static IP address for your PPPoE
connection. Please enter the information accordingly.
The following table describes the parameters of this page:
Field
Description
Servicename
You can set the service name.
Username
Enter the username for PPPoE dial-up, which is
provided by your ISP.
Password
Enter the password for PPPoE dial-up, which is
provided by your ISP.