User's Manual

59

IV‐3. Events

Selectanitemfromthe“Events”menuandreferto
theappropriatefollowingchapter.Youcanconfigure
settingsformotiondetection,scheduling,SMTPand
FTP.


IV‐3‐1. MotionDetection

IV‐3‐1‐1. MotionDetection

Thenetworkcamerafeaturesamotiondetectionfunctionandvariousoptions
for(motiondetection)eventsnotification.Whenmotionisdetected,itis
definedasan“event”andthecamerawillrecordforaspecifiedlengthoftime.
Youcansetthecameratosendthisrecordingasanotificationviaemailor
FTP,and
/ortolocalstoragesuchasaNASorMicroSDcardinsidethecamera.

Youcanalsosetthecameratosendapushnotificationforeacheventtoa
smartphonewithEdiViewIIinstalled.Youcanviewa10secondrecordingof
theevent,whichisautomaticallystoredinthenetworkcamera’smemory,
fromtheapp’s“Events”menu.

Recordingsstoredautomaticallyinthenetworkcameraare
limitedto10secondsandonlyalimitedquantitycanbestored.
Theserecordingsareseparatefromanyrecordingssavedtolocal
storageorsentviaemail/FTP,andwillbeoverwrittenasnew
recordingsarecreated.
