User's Manual

61
wireless devices.
Beacon(ms) You can define the time interval that a beacon
signal should be send. Default value is 100. Do
not modify this value unless you know what will
be affected.
TX Power You can select the wireless output power here.
Please select a proper output power setting
according to your actual needs. You may not need
100% of output power if other wireless clients are
not far from you.
Idle Time Select the idle time for the wireless access point.
Default value is 300. Do not modify this value
unless you know what will be affected.
To save changes, click ‘Apply button. Or you can click ‘Default’ to reset
all values to factory default value.