User's Manual

III. Browser Based Configuration Interface

III-1. Login

After setup you can access the browser based configuration interface to

configure or change the settings of the EW-7288APC.

Enter http://edimax**.setup into the URL bar of a web browser on a network

device which is connected to the EW-7288APC.

** are the last two characters of the EW-7288APC’s MAC address.

The MAC address is displayed on the label on the bottom of the

EW-7288APC.

If you can not access edimax.setup, connect the EW-7288APC to a

computer using an Ethernet cable and try again.

You will be prompted for a username and password. The default username is

“admin” and the default password is “1234”. For more information, refer to

the user manual.

You can access the browser based configuration interface using

the device’s IP address instead of using the URL

http://edimax**.setup.