User's Manual
11
212Webbrowserquicksetup
Before you can connect to the repeater and start configuration procedures,
your computer must be able to get an IP address automatically (use
dynamic IP address). If it’s set to use static IP address, or you’re unsure,
please refer to ‘Chapter X: Appendix, 5-1 Configuring TCP/IP on PC
’ to
set your computer to use dynamic IP address.
(1)Use Ethernet cable to connect your computer’s Ethernet port and
wireless repeater’s Ethernet port.
Or use your computer’s wireless configuration utility to search for
wireless router named ‘repeater0003’ and get connected. (The default
SSID of this repeater device is ‘repeater0003’, 0003 is an example, it is
the last 4 digits of device MAC number. Each device has different MAC
number, please find it on your device label.)
NOTE: this default SSID ‘repeater0003” is for example, different
device may have different last 4 digits.