User Manual

Wireless LAN Access Point Configuration
34
Access Point. The default password for the Access Point is 1234. Note
that the password is case-sensitive.
New Password Enter the password (up to 15-digit alphanumeric string) you want to login
to the Access Point. Note that the password is case-sensitive.
Re-Enter Password Reconfirm the password (up to 15-digit alphanumeric string) you want to
login to the Access Point. Note that the password is case-sensitive.
IP Address Designate the Access Point’ s IP Address. This IP Address should be
unique in your network. The default IP Address is 192.168.2.1.
Subnet Mask Specify a Subnet Mask for your LAN segment . The Subnet Mask of the
Access Point is fixed and the value is 255.255.255.0.
DHCP Server Enable or disable the DHCP Server.
Click Apply button at the bottom of the screen to save the above configurations. You can now configure
other advance sections or start using the Access Point.
3.2.6.1 DHCP Server Setting
DHCP Server will automatically give your LAN client an IP address. If the DHCP is
not enabled then you’ ll have to manually set your LAN client’ s IP address.
Parameter Description
Default Gateway IP Specify the gateway IP in your network. This IP address should be
different from the Management IP.
Domain Name Server IP This is the ISP’ s DNS server IP address that they gave you; or you can
specify your own preferred DNS server IP address.
Start IP/End IP You can designate a particular IP address range for your DHCP server to