User's Manual

90
Parameter
Description
Outgoing Default
Action
Specify the default action on the LAN to WAN (Traffic to
Internet) forwarding path. You can choose „Allow‟ if you
allow the IP Addresses listed in the following table from
connecting to the Internet; choose „Deny‟ if you deny the
IP Addressed listed in the following table from connecting
to the Internet.
Incoming Default
Action
Specify the default action on the WAN to LAN (Traffic
from Internet) forwarding path.沒有 deny and allow 說明
You can choose „Allow‟ if you allow the IP Addresses
listed in the following table from connecting to the
Internet; choose „Deny‟ if you deny the IP Addressed
listed in the following table from connecting to the
Internet.
Direction
Traffic bridging/forwarding direction: outgoing or
incoming.
Rule Action
Deny or allow traffic when matching this rule.
Source MAC Address
The source MAC address. It must be 12-digit
hexadecimal format, for example: “00-d0-59-c6-12-43”.
Destination MAC
Address
The destination MAC address. It must be 12-digit
hexadecimal format, for example: “00-d0-59-c6-12-50”.
Current Filter Table
If you want to remove some filter rules from the "Current
Filter Table", select the MAC Address you want to
remove in the table and then click "Delete Selected". If
you want remove all settings from the table, just click
"Delete All" button.
When you finish, click „Apply Changes‟. You‟ll see the following message
displayed on web browser: