User's Manual

wireless port, and the blank for not applicable.

ClassQueue

The priority level for the traffic that matches this

classification rule. Please refer to 5.2.5.2 QOS Queue to

create a ClassQueue.

802.1p_Mark

Select this field to mark the 3-bit user-priority field in the

802.1p header of the packet that matches this

classification rule. Note that this 802.1p marking is

workable on a given PVC channel only if the VLAN tag is

enabled in this PVC channel.

IP.Pred_Mark

Select this field to mark the IP precedence bits in the

packet that match this classification rule.

TOS_Mark

The IP (Internet Protocol) uses the ToS (Type of Service)

field to provide an indication of the quality of service

desired. These parameters are to be used to guide the

selection of the actual service parameters when

transmitting an IP datagram through a particular

network.0

IP QoS Rules

This table lists the rules you have configured. Click

“Delete Selected” to delete the selected rules or click

“Delete All” to delete all the rules.

When you finish, click „Apply Changes‟. You‟ll see the following message

displayed on web browser: