User's Manual

75
IP Pred:
In QoS, a three-bit field in the ToS byte of the IP header
(see RFC 791). Using IP Precedence, a network
administrator can assign values from 0(the default) to 7
to classify and prioritize types of traffic.
802.1P:
IEEE 802.1p is a 3 bit field within an Ethernet frame
header when using tagged frames on an 802.1 network.
It specifies a priority value of between 0 and 7 inclusive
that can be used by Quality of Service (QoS) disciplines
to differentiate traffic.
Source IP
The IP address of the traffic source.
Netmask (Source)
The source IP netmask. This field is required if the
source IP has been entered.
Port (Source)
The source port of the selected protocol. You cannot
configure this field without entering the protocol first.
Destination IP
The IP address of the traffic destination.
Netmask (Destination)
The destination IP netmask. This field is required if the
destination IP has been entered.
Port (Destination)
The destination port of the selected protocol. You cannot
configure this field without entering the protocol first.
Protocol
The selections are TCP, UDP, ICMP and the blank for
none. This field is required if the source port or
destination port has been entered.
Physical Port
The incoming ports. The selections include LAN ports,