User's Manual

73
Push Button
Configuration
Clicking this button will invoke the PBC method of WPS.
It is only used when AP acts as a registrar.
Start PBC
Click to start the Push Button method of WPS.
Reset
It restores the original values.
Client PIN Number
It is only used when users want their station to join AP‟s
network. The length of PIN is limited to four or eight
numeric digits. If users enter eight-digit PIN with
checksum error, there will be a warning message
popping up. If users insist on this PIN, AP will take it.
When you finish, click „Apply Changes‟. You‟ll see the following message
displayed on web browser:
Press „Continue‟ to save the settings made and back to web management
interface; press „Apply‟ to save the settings made and restart the router so the
settings will take effect after it reboots.