User's Manual

54
request appropriately.
When you finish, click „Apply Changes‟. You‟ll see the following message
displayed on web browser:
Press „Continue‟ to save the settings made and back to web management
interface; press „Apply‟ to save the settings made and restart the router so the
settings will take effect after it reboots.
5.2.3.3. DHCP Server
When the DHCP server is enabled, the router will automatically give your LAN
clients an IP address. If the DHCP is not enabled then you‟ll have to manually set
your LAN client‟s IP addresses.