User's Manual

39
of PVC(s) will be reduced. Besides this, it cannot be set
for the connection type of CBR and Real-time VBR. If
you enable the QoS service, please check the detailed
configuration in 5.2.5 QoS
PPP Setting
User Name
Enter the username exactly as your ISP assigned.
Password
Enter the password that your ISP has assigned to you.
Type
Continuous – The connection will be kept always on. If
the connection is interrupted, the router will re-connect
automatically.
Connect on Demand – Only connect when you want to
surf the Internet. “Idle Time” is set to stop the connection
when the network traffic is not sending or receiving after
an idle time.
Manual – After you have selected this option, please go
to Status page. You will see the “Connect” button, click it
and the router will connect to the ISP. If you want to stop
the connection, please click “Disconnect” button.
Idle Time (ms)
“Idle Time” is set to stop the connection when the
network traffic is not sending or receiving after an idle
time.
WAN IP Setting
Type
Fixed IP – Set the static IP Address to the router. Please
enter the IP Address your ISP has assigned.
DHCP – To get the IP Address from the ISP directly.