User's Manual

Here are descriptions of every setup items:

Band (2): Select the band you want to use, all the wireless

routers must use the same setting.

ESSID (3): This is the name of wireless router. You can type any

alphanumerical characters here, maximum 32

characters. ESSID is used to identify your own

wireless router from others when there are other

wireless routers in the same area. Default SSID is

‘default’, it’s recommended to change default ESSID

value to the one which is meaningful to you, like

myhome, office_room1, etc.

Channel Select the channel you want to use, all the wireless

Number (4): clients must use the same setting.

Associated Clients (5): Click ‘Show Active Clients’ button, then an

“Active Wireless Client Table” will pop up. You can

see the status of all active wireless stations that are

connecting to the access point.

Root AP SSID (6): In ‘Universal Repeater’ mode, this device can act as

a station to connect to a Root AP. You should assign

the SSID of the Root AP here or click ‘Select Site

Survey’ button to choose a Root AP.