User's Manual

70
Here are descriptions of every setup items:
Fragment Set the Fragment threshold of wireless radio.
Threshold: Do not modify default value if you don’t know
what it is, default value is 2346.
RTS Threshold: Set the RTS threshold of wireless radio. Do not
modify default value if you don’t know what it is,
default value is 2347.
Beacon Interval: Set the beacon interval of wireless radio. Do not
modify default value if you don’t know what it is,
default value is 100.
DTIM Period: Set the DTIM period of wireless radio. Do not
modify default value if you don’t know what it is,
default value is 3.
Data Rate: Set the wireless data transfer rate to a certain value.
Since most of wireless devices will negotiate with
each other and pick a proper data transfer rate
automatically, it’s not necessary to change this
value unless you know what will happen after
modification.
N Data Rate: Same as above, but only for 802.11n clients.
Channel Width: Set channel width of wireless radio. Do not modify
default value if you don’t know what it is, default
setting is ‘Auto 20/40 MHz’.
Preamble Type: Set the type of preamble, do not modify default
value if you don’t know what it is, default setting is
‘Short Preamble’.
Broadcast ESSID: Decide if the wireless router will broadcast its own
ESSID or not. You can hide the ESSID of your
wireless router (set the option to ‘Disable’), so only