User's Manual

Here are descriptions of every setup items:
Enable Port Check this box to enable port mapping,
Forwarding (1): and uncheck this box to disable port mapping.
Private IP (2): Input the IP address of the computer on local
network which provides internet service.
Type (3): Select the type of connection, TCP or UDP. If you’re
not sure, please select ‘Both’.
Port Range (4): Input the starting port number in the left field, and
input the ending port number in the right field. If
you only want to redirect a single port number, just
fill the port number in the left field.
Comment (5): Please input any text to describe this mapping, up to
16 alphanumerical characters.
Add (6): Add the mapping to port forwarding table.
Reset (7): Remove all inputted values.
Port Forwarding All existing port forwarding mappings will
Table (8): be displayed here.
‘Delete Please select a port forwarding mapping by
Selected’ (9): clicking the ‘Select’ box of the mapping, then click
‘Delete Selected’ button to remove the mapping. If
there’s no existing mapping, this button will be
grayed out.
Delete All (10): Delete all mappings existed in virtual server table.
Reset (11): Unselect all mappings.
After you finish with all settings, please click ‘Apply’ (12) button, and the
following message will be displayed on your web browser: