User's Manual

Here are descriptions of every setup items:
Enable WPS (1) Check this box to enable WPS function, uncheck it
to disable WPS.
Wi-Fi Protected WPS-related system information will be displayed
Setup Information here:
(2)
WPS Status: If the wireless security (encryption)
function of this wireless router is properly set, you’ll
see ‘Configured’ message here. If wireless security
function has not been set, you’ll see ‘unConfigured’.
Self PIN code: This is the WPS PIN code of this
wireless router. This code is useful when you need to
build wireless connection by WPS with other
WPS-enabled wireless devices.
SSID: The SSID of this wireless router will be
displayed here.
Authentication Mode: The wireless security
authentication mode of this wireless router will be
displayed here.
Configure Click ‘Start PBC’ to start Push-Button style WPS
via Push Button setup procedure. This wireless router will wait for
(3) WPS requests from wireless clients for 2 minutes.
The ‘WLAN’ LED on the wireless router will be
steady on when this wireless router is waiting for
incoming WPS request.
Configure Please input the PIN code of the wireless client you
via client wish to connect, and click ‘Start PIN’ button.
PinCode (4) The ‘WLAN’ led on the wireless router will be
steady on when this wireless router is waiting for
incoming WPS request.