User's Manual

Key Format (3): There are two types of key format: ASCII and Hex.

When you select a key format, the number of

characters of key will be displayed. For example, if

you select ’64-bit’ as key length, and ‘Hex’ as key

format, you’ll see the message at the right of ‘Key

Format’ is ‘Hex (10 characters), which means the

length of WEP key is 10 characters.

Default Tx Key (4): You can set up to four sets of WEP key, and you can

decide which key is being used by default here. If

you don’t know which one you should use, select

‘Key 1’.

Encryption Key Input WEP key characters here, the number of

1 to 4 (5-8): characters must be the same as the number

displayed at ‘Key Format’ field. You can use any

alphanumerical characters (0-9, a-z, and A-Z) if

you select ‘ASCII’ key format, and if you select

‘Hex’ as key format, you can use characters 0-9, a-f,

and A-F. You must enter at least one encryption key

here, and if you entered multiple WEP keys, they

should not be same with each other.

Enable 802.1x Check this box and another sub-menu will appear:

Authentication (9):

RADIUS Server Please input the IP address of radius

IP address (11): server here

RADIUS Server Please input the port number of radius

Port (12): server here.