User's Manual

ESSID (3) Input the ESSID of your wireless router, it can be
the same with other wireless routers for the
convenience of roaming, or different with other
wireless routers so you can identify each of them.
Channel Select the channel you want to use, two wireless
Number (4) routers must use the same setting.
MAC address Input the MAC address of other wireless routers.
1 to 4 (5 - 8)
Set Click to set security settings for this connection
Security (9) (Please go to section ‘2-7-3 Wireless Security’
for detailed instructions).
After you finish the wireless setting, please click ‘Apply’ button, after
you click ‘Apply’, the following message will be displayed on your web
browser:
Please click ‘Continue’ to back to previous setup menu; to continue on
router setup, or click ‘Apply’ to reboot the router so the settings will take
effect (Please wait for about 50 seconds while router is rebooting).
2-7-2 Advanced Wireless Settings
This router provides some advanced control of wireless parameters, if
you want to configure these settings, please click ‘Wireless’ menu on the
left of web management interface, then click ‘Advanced Settings’, and
the following message will be displayed on your web browser: