User's Manual

2-7-1-2 Setup procedure for ‘AP Bridge-Point to Point:

In this mode, you can connect your wireless router with another, to

combine two access points and expand the scope of wireless network, and

all clients (wired only – AP will not accept wireless clients in this mode)

of two wireless routers will think they’re on the same physical network.

This function is very convenient when you need to connect two networks

between two buildings. Here are instructions about how to connect two

wireless routers together:

Here are descriptions of every setup items:

NOTE: If you don’t special reason to limit the type of allowed wireless

client, it’s recommended to choose ‘2.4 GHz (B+G+N) to maximize

wireless client compatibility.

TIPS: You can try to change channel number to another one if you

think the data transfer rate is too slow, or keep having problem while

transferring the file over wireless network. There could be some other

wireless routeres using the same channel, which will disturb the radio

communication between wireless client and the wireless router.

NOTE: Two wireless routers must use the same mode, band, channel

number, and security setting!