User's Manual

Delete If you want to delete a specific DMZ entry, check
Selected (7): the ‘select’ box of the DMZ entry you want to delete,
then click ‘Delete Selected’ button. (You can select
more than one DMZ entries).
Delete All (8): If you want to delete all DMZ entries listed here,
please click ‘Delete All’ button.
Reset (9): You can also click ‘Reset’ button to unselect all
DMZ entries.
After you finish with all settings, please click ‘Apply’ (10) button, and the
following message will be displayed on your web browser:
Please click ‘Continue’ to back to previous setup menu; to continue on
other setup procedures, or click ‘Apply’ to reboot the router so the
settings will take effect (Please wait for about 50 seconds while router is
rebooting).
If you want to reset all settings in this page back to previously-saved
value, please click ‘Cancel’ button.
3-4 System Status
The functions described here will provide you with system related
information. To enter system status menu, please either click ‘Status’ link
located at the upper-right corner of web management interface, or click
‘Status’ button in main menu.
3-4-1 System information and firmware version