User's Manual

Here are descriptions of every setup items:

Enable WPS (1): Check this box to enable WPS function, uncheck it

to disable WPS.

WPS Information (2):WPS-related system information will be displayed

here:

WPS Status: If the wireless security (encryption)

function of this wireless router is properly set,

you‟ll see „Configured‟ message here. If wireless

security function has not been set, you‟ll see

„unConfigured‟.

PinCode Self: This is the WPS PIN code of this

wireless router. This code is useful when you need

to build wireless connection by WPS with other

WPS-enabled wireless devices.

SSID: The SSID of this wireless router will be

displayed here.

Authentication Mode: The wireless security

authentication mode of this wireless router will be

displayed here. If you don‟t enable security

function of the wireless router before WPS is

activated, the router will auto set the security to

WPA (AES) and generate a set of passphrase key

for WPS connection.

Passphrase Key: The wireless security key of the

router will be displayed here.

Config Mode (3): There are „Registrar‟ and „Enrollee‟ modes for the

WPS connection. When „Registrar‟ is enabled, the

wireless clients will follow the router‟s wireless

settings for WPS connection. When „Enrolle‟ mode

is enabled, the router will follow the wireless