User's Manual

only people those who know the ESSID of your

wireless router can get connected.

CTS Protect (10): Enabling this setting will reduce the chance of

radio signal collisions between 802.11b and

802.11g/n wireless access points. It‟s recommended

to set this option to „Auto‟ or „Always‟. However, if

you set to „None‟, your wireless router should be

able to work fine, too.

WMM (11): The short of Wi-Fi MultiMedia, it will enhance the

data transfer performance of multimedia contents

when they‟re being transferred over wireless

network. If you don’t know what it is / not sure if

you need it, it’s safe to set this option to ‘Enable’,

however, default value is ‘Disable’.

After you finish these wireless settings, please click „Apply‟ (12) button,

and the following message will be displayed on your web browser:

Please click „Continue‟ to back to previous setup menu; to continue on

router setup, or click „Apply‟ to reboot the router so the settings will

take effect (Please wait for about 30 seconds while router is rebooting).