User's Manual

72
Here are descriptions of every setup items:
Band (2): Select the band you want to use, all the wireless
routers must use the same setting.
SSID (3): This is the name of wireless router. You can type
any alphanumerical characters here, maximum 32
characters. SSID is used to identify your own
wireless router from others when there are other
wireless routers in the same area. Default SSID is
„default‟, it‟s recommended to change default
ESSID value to the one which is meaningful to you,
like myhome, office_room1, etc.
Channel Select the channel you want to use, all the wireless
Number (4): clients must use the same setting.
Associated Clients (5): Click „Show Active Clients‟ button, then an
“Active Wireless Client Table” will pop up. You
can see the status of all active wireless stations
that are connecting to the access point.
Root AP SSID (6): In „Universal Repeater‟ mode, this device can act
as a station to connect to a Root AP. You should
assign the SSID of the Root AP here or click
„Select Site Survey‟ button to choose a Root AP.
Site Survey (7): Click „Select Site Survey‟ button, then a “Wireless
Site Survey Table” will pop up. It will list all
available access points near by. You can select one
access point in the table and the router will join
wireless LAN through this access point.
After you finish the wireless setting, please click „Apply‟ button, after
you click „Apply‟, the following message will be displayed on your web
browser: