User's Manual

69
2-7-1-4 Setup procedure for AP Bridge-Point to Multi-Point:
In this mode, you can connect your wireless router with at least four
wireless routers to expand the scope of wireless network, and all clients
(wired only AP will not accept wireless clients in this mode) of the
wireless routers will think theyre on the same physical network.
Here are descriptions of every setup items:
Band (2): Select the band you want to use, all the wireless
routers must use the same setting.
Channel Select the channel you want to use, all the wireless
Number (3): routers must use the same setting.
MAC address Input the MAC address of other wireless routers.
1 to 4 (4 - 7):
Security Click to set security settings for this connection
Setting (8): (Please go to section 2-7-3 Wireless Security
for detailed instructions).
1
2
3
4
5
6
7
8