User's Manual

2-7-1-3 Setup procedure for ‘AP Bridge-Point to Point’:

In this mode, you can connect your wireless router with another, to

combine two access points and expand the scope of wireless network,

and all clients (wired only – AP will not accept wireless clients in this

mode) of two wireless routers will think they‟re on the same physical

network. This function is very convenient when you need to connect two

networks between two buildings. Here are instructions about how to

connect two wireless routers together:

Here are descriptions of every setup items:

Band (2): Select the band you want to use, two wireless

routers must use the same setting.

Channel Select the channel you want to use, two wireless

Number (3): routers must use the same setting.

MAC

address 1(4): Input the MAC address of another wireless router.

Security Click to setting security for this connection

Settings (5): (Please go to section „2-7-3 Wireless Security‟

for detailed instructions).

NOTE: Two wireless routers must use the same mode, band, channel

number, and security setting!