User's Manual

58
Please follow the following instructions to set wired LAN parameters:
Please click „LAN‟ menu on the left of web management interface, there
are three setup groups here: „LAN IP‟, „DHCP Server‟, and „Static
DHCP Leases Table‟. Here are setup instructions for each of them:
2-6-1 LAN IP section:
Here are descriptions of every setup items:
IP address (1): Please input the IP address of this router.
Subnet Mask (2): Please input subnet mask for this network.
802.1d If you wish to activate 802.1d spanning tree
Spanning Tree (3): function, select „Enabled‟ for setup item „802.1d
Spanning Tree‟, or set it to „Disabled‟
DHCP Server (4): If you want to activate DHCP server function of
this router, select „Enabled‟, or set it to „Disabled‟.
Recommended Value if you don’t know what to fill:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
802.1d Spanning Tree: Disabled
DHCP Server: Enabled
1
3
2
4