User's Manual

48
2-4-3 Remote Management
This router does not allow management access from Internet, to prevent
possible security risks (especially when you defined a weak password, or
didn’t change default password). However, you can still management this
router from a specific IP address by enabling the ‘Remote Management’
Function.
To do so, please follow the following instructions:
Please click ‘System’ menu on the left of web management interface, then
click ‘Remote Management’, and the following message will be
displayed on your web browser:
Here are descriptions of every setup items:
Host Address (1): Input the IP address of the remote host you wish to
initiate a management access.
Port (2): You can define the port number this router should
expect an incoming request. If you’re providing a
web service (default port number is 80), you should
try to use other port number. You can use the default
port setting ‘8080’, or something like ‘32245’ or
‘1429’. (Any integer between 1 and 65534)
Enable (3): Select the field to start the configuration.
1
2
3
4