User's Manual
Table Of Contents
- Chapter I: Product Information
- Chapter II: System and Network Setup
- 2-1 Build network connection
- 2-2 Connecting to wireless broadband router by web browser
- 2-3 Using ‘Quick Setup’
- 2-4 Basic Setup
- 2-5 Setup Internet Connection (WAN Setup)
- 2-5-1 Setup procedure for ‘Dynamic IP’:
- 2-5-2 Setup procedure for ‘Static IP’:
- 2-5-3 Setup procedure for ‘PPPoE’:
- 2-5-4 Setup procedure for ‘PPTP’:
- 2-5-5 Setup procedure for ‘L2TP’:
- 2-5-6 Setup procedure for ‘Telstra Big Pond’:
- 2-5-7 Setup procedure for ‘DNS’:
- 2-5-8 Setup procedure for ‘DDNS’:
- 2-5-9 Setup procedure for ‘WISP’:
- 2-6 Wired LAN Configurations
- 2-7 Wireless LAN Configurations
- 2-7-1 Basic Wireless Settings
- 2-7-1-1 Setup procedure for ‘Access Point’:
- 2-7-1-2 Setup procedure for ‘Station-Infrastructure’:
- 2-7-1-3 Setup procedure for ‘AP Bridge-Point to Point’:
- 2-7-1-4 Setup procedure for ‘AP Bridge-Point to Multi-Point’:
- 2-7-1-5 Setup procedure for ‘AP Bridge – WDS’
- 2-7-1-6 Setup procedure for ‘Universal Repeater’
- 2-7-2 Advanced Wireless Settings
- 2-7-3 Wireless Security
- 2-7-4 Wireless Access Control
- 2-7-5 Wi-Fi Protected Setup (WPS)
- 2-7-6 Security Tips for Wireless Network
- 2-7-1 Basic Wireless Settings
- Chapter III Advanced Functions
- Chapter IV: Appendix
147
Chapter IV: Appendix
4-1 Hardware Specification
CPU: MEDIATEK RT6856
RF: MEDIATEK RT5392 + RT5592
Gigabit Switch: REALTEK RTL8367R-VB
Flash: 4MB
DDR2 RAM: 32MB
WAN Port: 10/100/1000M Port x 1
LAN Ports: 10/100/1000M Port x 4
Antenna: External Dual Band Dipole Antenna x 2 (2T2R Spatial Multiplexing
MIMO configuration; 2 antennas are for signal transmitting and 2 antennas are
for signal receiving)
Power: 12VDC, 1A Switching Power Adapter
Dimension: 30(H) x 157(W) x 127(D) mm
Temperature: 32~104°F (0 ~ 40°C)
Humidity: 10-90% (Non Condensing)
Certification: CE/FCC