User Manual

Here are descriptions of every setup items:

Band (2): Select the band you want to use; two wireless

routers must use the same setting.

Channel Select the channel you want to use, two wireless

Number (3): routers must use the same setting.

MAC

address 1(4): Input the MAC address of another wireless router.

Security Click to setting security for this connection

Settings (5): (Please go to section „2-7-3 Wireless Security‟

for detailed instructions).

2-7-1-4 Setup procedure for ‘AP Bridge-Point to Multi-Point’:

In this mode, you can connect your wireless router with at least four

wireless routers to expand the scope of wireless network, and all clients

(wired only – AP will not accept wireless clients in this mode) of the

wireless routers will think they‟re on the same physical network.

2.4GHz AP Bridge ( Point to Multi-Point) Settings

NOTE: Two wireless routers must use the same mode, band, channel

number, and security setting!