User Manual

Please click „Continue‟ to back to previous setup menu; to continue on

other setup procedures, or click „Apply‟ to reboot the router so the

settings will take effect (Please wait for about 30 seconds while router is

rebooting).

If you want to reset all settings in this page back to previously-saved

value, please click „Cancel‟ button.

2-5-9 Setup procedure for ‘WISP’:

If your network service provided by your service provider is through

wireless network, please select this mode. After you have connected the

router to the access point of service provider wirelessly, please setup the

WAN connection type in WAN page.

Here are descriptions of every setup items:

Disable/Enable/ There are three selections for disable or disable