User's Manual Part 1
58
Start IP
E
nter the start IP address for the DHCP
server’s IP address leases.
End IP
E
nter the end IP address for the DHCP
server’s IP address leases.
Your device’s DHCP server can be configured to assign static (fixed) IP addresses to
specified network devices, identified by their unique MAC address.
Enable
Static
DHCP
Leases
Enable/disable static DHCP leases. This must
be enabled in order to assign any network
device a static IP address.
MAC
Address
Enter
the
specified network device’s
MAC
address
here
.
IP
A
ddress
Assign a fixed IP address fo
r the specified
network device
here.
Add
A
dd
the information
to
the
“
S
tatic
DHCP
L
eases
T
able
”
.
Clear
C
lear the
MAC
address
and
IP
address
field
s
.
Delete Selected
/
Delete All
Delete selected or all entries from the table.
The LAN IP page will be displayed as below when your device is
set to access point mode. You can set theBR-6428nS
V3/BR-6228nS V3 to obtain an IP address automatically or you
can specify an IP address.