User's Manual

Please follow the following instructions to set wired LAN parameters:

Please click „LAN‟ menu on the left of web management interface, there

are three setup groups here: „LAN IP‟, „DHCP Server‟, and „Static DHCP

Leases Table‟. Here are setup instructions for each of them:

2-6-1 LAN IP section:

Here are descriptions of every setup items:

IP address (1): Please input the IP address of this router.

Subnet Mask (2): Please input subnet mask for this network.

802.1d If you wish to activate 802.1d spanning tree

Spanning Tree (3): function, select „Enabled‟ for setup item „802.1d

Spanning Tree‟, or set it to „Disabled‟

DHCP Server (4): If you want to activate DHCP server function of this

router, select „Enabled‟, or set it to „Disabled‟.

Recommended Value if you don’t know what to fill:

IP Address: 192.168.2.1

Subnet Mask: 255.255.255.0

802.1d Spanning Tree: Disabled

DHCP Server: Enabled