User's Manual
55
Here are descriptions of every setup items:
Disable/Enable/ There are three selections for disable or disable
staEnable (1): wireless ISP functions.
Disable: disable this function.
Enable: enable this function and the router can
connect to the access points installed by your
wireless service provider. Any clients associated to
the router can access the Internet service through
the wireless network.
Note: In this mode, if you are informed by your
wireless ISP that the wireless settings of the
access point is changed, please configure the
router in this page for match the settings.
staEnable: enable this function and the router can
only allow to be connected through wired Ethernet
cable for WAN access service.
SSID (2): This is the name of wireless network. Input the SSID
name that your wirelesses ISP provide to you.
1
2
3
4
5
6