User's Manual

of two wireless routers will think they’re on the same physical network.

This function is very convenient when you need to connect two networks

between two buildings. Here are instructions about how to connect two

wireless routers together:

Here are descriptions of every setup items:

Band (2): Select the band you want to use, two wireless

routers must use the same setting.

Channel Select the channel you want to use, two wireless

Number (3): routers must use the same setting.

MAC

address 1(4): Input the MAC address of another wireless router.

Security Click to setting security for this connection

Settings (5): (Please go to section ‘2-7-3 Wireless Security’

for detailed instructions).

2-7-1-4 Setup procedure for ‘AP Bridge-Point to Multi-Point’:

In this mode, you can connect your wireless router with at least four

wireless routers to expand the scope of wireless network, and all clients

(wired only – AP will not accept wireless clients in this mode) of the

wireless routers will think they’re on the same physical network.

NOTE: Two wireless routers must use the same mode, band, channel

number, and security setting!