User's Manual

Here are descriptions of every setup items:

Band (2): Select the band you want to use.

SSID (3): This is the name of wireless network. You can type

the SSID of the network you would like to connect

here.

Site Survey (4): When you use this wireless router as a wireless

station for Ethernet network device to have wireless

capability, you have to associate it with a working

access point. Click ‘Select Site Survey’ button, then

a “Wireless Site Survey Table” will pop up. It will

list all available access points near by. You can

select one access point in the table and it will join

wireless LAN through this access point.

Wireless MAC For some applications, you may need to designate a

Address (5): specific MAC address for the router. Please enter the

MAC address here. If you are connecting the router

to a computer, you can simply press ‘Clone Mac

address’ button to fill the MAC address field with

the MAC address of your computer.

2-7-1-3 Setup procedure for ‘AP Bridge-Point to Point’:

In this mode, you can connect your wireless router with another, to

combine two access points and expand the scope of wireless network, and

all clients (wired only – AP will not accept wireless clients in this mode)