User's Manual

wireless routers in the same area. Default SSID is

‘default’, it’s recommended to change default SSID

value to the one which is meaningful to you, like

myhome, office_room1, etc.

Channel Number (4): Please select a channel from the dropdown list of

‘Channel Number’, available channel numbers are

1 to 13 for European countries, 1 to 11 for USA. You

can choose any channel number you want to use,

and almost all wireless clients can locate the

channel you’re using automatically without any

problem. However, it’s still useful to remember the

channel number you use, some wireless client

supports manual channel number select, and this

would help in certain scenario when there is some

radio communication problem.

Associated Clients (5): Click ‘Show Active Clients’ button, then an

“Active Wireless Client Table” will pop up. You can

see the status of all active wireless stations that are

connecting to the access point.

2-7-1-2 Setup procedure for ‘Station-Infrastructure’:

In this mode, you can connect the router to Ethernet device such us TV,

Game player, HDD&DVD to enable the Ethernet device be a wireless

station and join to a wireless network through an access point or AP

router.

TIPS: You can try to change channel number to another one if you

think the data transfer rate is too slow. There could be some other

wireless routers using the same channel, which will disturb the radio

communication between wireless client and the wireless router.

NOTE: If you don’t have special reason to limit the type of allowed

wireless client, it’s recommended to choose ‘2.4 GHz (B+G+N) to

maximize wireless client compatibility.