User's Manual

Please select a proper operation mode you want to use from ‘Mode’

dropdown menu (1), and continue on other operation mode specific

settings:

AP - Please go to section 2-7-1-1

Station-Infrastructure - Please go to section 2-7-1-2

AP Bridge-Point to Point - Please go to section 2-7-1-3

AP Bridge-Point to Multi-Point - Please go to section 2-7-1-4

AP Bridge-WDS - Please go to section 2-7-1-5

Universal Repeater - Please go to section 2-7-1-6

2-7-1-1 Setup procedure for ‘Access Point’:

Please select the radio band you want to use from ‘Band’ dropdown menu

(2), and the following message will be displayed:

Here are descriptions of every setup items:

Band (2): Please select the radio band from one of following

NOTE: For ‘AP Bridge-Point to Point’ and ‘AP Bridge-Point to

Multi-Point’ mode, wireless router is operated in wireless bridge

dedicated mode – wireless router is only used to expand the scope of

network, and no wireless clients will be accepted. If you want to use

your wireless router to expand the scope of network, and also accept

wireless clients, please select ‘AP Bridge-WDS’ or ‘Universal

Repeater‘ mode.