User's Manual

If you want to remove all characters you just entered, click „Clear‟.

After you clicked „Add‟, the MAC address and IP address mapping

will be added to „Static DHCP Leases Table‟ section.

If you want to delete a specific item, please check the „Select‟ box of a

MAC address and IP address mapping (1), then click „Delete Selected‟

button (2); if you want to delete all mappings, click „Delete All‟ (3). If

you want to deselect all mappings, click „Reset (4).

After you finish all LAN settings, please click „Apply‟ button on the

bottom of this page. After you click „Apply‟, the following message will

be displayed on your web browser:

Please click „Continue‟ to back to previous setup menu; to continue on

router setup, or click „Apply‟ to reboot the router so the settings will take

effect (Please wait for about 30 seconds while router is rebooting).