User's Manual

Hardware installation (For Certified Wireless Router):
1) Remove the original antenna from the certified wireless router. To remove the antenna, twist the
base of the antenna in a counter clockwise motion until the antenna is completely removed.
2) Connect the signal booster to the certified wireless router using the included color coded
connector cable. Connect the gray end to the input connector on the left side of the signal booster,
Connect the white end to the antenna connector on the antenna connector on the certified wireless
router.
3) After you have connected the signal booster to the certified wireless router, take the antenna
included in the package and connect it to the antenna connector on the signal booster. Screw the
antenna base in clockwise until the antenna is firmly connected to the booster.
*This booster is not intended for use with any un-certified wireless products