User's Manual

Backup Settings Click ‘Save…’ button to save wireless projector server’s
current setting as a file and store it on your computer.
Restore Settings Click ‘Browse…’ button to select a previously-saved
configuration file stored in your computer’s folder.
Reset Reset all settings of wireless projector server back to
factory default settings.
5-8-2 Firmware Upgrade
Upgrade the firmware of this WPS.
If WPS connects to Internet and you wish it to upgrade firmware automatically,
select ‘Auto’; WPS will download latest firmware and upgrade automatically.
When you set this setting to ‘Manual’, WPS will detect new firmware on Internet
automatically, and you’ll see a prompt message on OSD menu. If you wish to
upgrade firmware, you can click ‘Check Now’ button to proceed.
Note: it’s recommended to use wired Ethernet connection to perform
firmware upgrade.
When firmware is upgrading, you’ll see the following message: