User's Manual

2-3-1 Windows XP IP address setup:
Click ‘Start’ from windows toolbar
locate at bottom, open control panel,
then select Network and Internet
Connections, click Network
Connections, and then double-click
Local Area Connection, Local Area
Connection Status window will
appear, and then click ‘Properties’
Select ‘Use the following IP address’,
then input the following settings in
respective field:
IP address: 192.168.0.x (where x is
an integer greater or less than 200, if
there’s more than one computer need
to use this WPS on the same
network, each computer should use
an unique number)
Subnet Mask: 255.255.255.0
Click ‘OK’ when finish.