User's Manual

● Power ON/OFF
1. Power on automatically when taken out from the charging case;
2. Power o automatically while placed into the charging case.
● TWS (true wireless stereo) Pairing of the Left and Right
Headphones
The left and right headphones have nished TWS pairing before leaving
the factory. If the wireless connection fails to resume, please follow the
steps below to re-pair:
• With no TWS and Bluetooth connection, double press the touch
buttons to enter TWS pairing state, blue lights ashing rapidly;
• After pairing is done, blue lights of two headphones will ash slowly.
● Bluetooth Connection
1. Two Headphones Mode
• Open the charging case to take two headphones out, press and hold
the touch button of the left headphone to enter pairing state, red
and blue light ashing rapidly;
• Set mobile phone to search for and connect to “EDIFIER TWS1”, after
pairing is successful, blue light will ash slowly.
2. One Headphone Mode
If use one headphone only, please take the left or right headphone
out from the charging case, and refer to the procedures mentioned in
“Two Headphones Mode” to pair it with mobile phone.