Manual Edition 1.1, Nov. 2016 Bi-200-R1280D-01 Suit 2207, 22nd floor, Tower ll, Lippi center, 89 Queen sway Hong Kong Tel: +852 2522 6989 Fax: +852 2522 1989 www. edifier.com © 2016 Edifier International Limited. All rights reserved. Printed in China NOTICE: For the need of technical improvement and system upgrade information contained herein may be subject to change from time to time without prior notice. Products of EDIFIER will be customized for different applications.
WARNING: To reduce risk of fire or electric shock, do not expose this apparatus to rain or moisture. Thank you for purchasing Edifier R1280DB multimedia speakers, Please read this manual carefully before operating this system. (0 Box Contents: CAUTION ale gle Es ae i eed . lee Passive speaker The lightning flash with arrowhead inside To prevent the risk of electric shock, do not The exclamation point inside the triangle Active speaker the triangle, Is intended to alert the user remove cover {or back).
© EDIFIER Infrared receiver 2. Treble dial 3. Bass dial 4, Master volume control! input selection Press in to navigate between audio sources: LINE > Note: Press and hold the master volume control to enter into standby mode, 5. Power indicator Red: optical/coaxial inputs Blue: Bluetooth input Green: Line inline in inputs 6. Speaker-output 7. Power switch 8. Power cord 9. Line inl input port 10. Line in2 input port 11. Optical input port 12. Coaxial input port © 1. Power ON/OFF 2. Mute 3, Volume decrease 4.
or > 1. Press the master volume control on the active speaker or press the “LINE INLINE” button on the remote control to select LINE IN input. The indicator turns to green. 2. Using audio cable to connect audio source to the speaker. 3. Play from your device and adjust the volume accordingly. 1. Connect the speakers with the included speaker connecting cable 2.
English 1. Press the master volume control on the active speaker or press the "OPT/COX” button on the remote control to select the optical/coaxial input. The indicator turns to red. 2. Using optical or coaxial cable (optical cable included) to connect audio sources to your speaker. 3. Play from your devices and adjust the volume accordingly. Note: 1. In optical and coaxial modes, only PCM signal with can be decoded. Pairing 1.
English Power output: Signal to noise ratio dB(A): Noise level: Input sensitivity; Frequency response: Bass unit: Tweeter unit: L/R: 21W+21W L/R: 285dB (A) <25dB(A) LINE IN1: LINE IN2: TOPCOAT R/L: 500£50mFFS Bluetooth: 55Hz-20KHz 4 inch (116mm) ®13mm silk dome tweeter Problem Solution No sound * Check if the power indicator light is ON * Try to turn up the volume using either the master volume control or remote control.
