System information
4
Copyright © Edgewater Computer Systems Inc. 2010
EAP3000 Users Manual
Version: 1.2
Issue Date: June 12, 2010
1 QuickStart
1. The unit can be powered one of two ways either with the supplied AC adapter or with PoE
(Power over Ethernet) enabled 10/100 Ethernet cable into the RJ45 jack as illustrated in
Figure 1
2. Mount EAP3030/1-I on wall mount using the wall mounting plate as shown in Figures 2 to 4
or as required on a flat surface.
3. power to the unit allow 30 seconds for software boot-up. After applying
4. Log into unit.
Figure 1 - Power and Ethernet Rear-panel Connections
Ethernet &
optional PoE
Power Adapter
receptacle