System information

EAP3000 Users Manual

Version: 1.2

Issue Date: June 12, 2010

Click Reset to revert back to the previous settings.

Idle Logout Time

For security reasons, the device will log you out of the web management interface after a period of

inactivity. The factory default timeout is 5 minutes. To change the timeout period, type in a new

value in the field labeled Administrator login times out after idle for field.

Click Apply to save your changes.

Click Reset to revert back to the previous settings.

5.3 Management -> System Time

Time Zones & NTP Servers Configuration

Select the Local Time Zone according to your region.

Configure NTP Server to have the device synchronize time with an NTP server.

If supported for your region, you can check Automatically adjust for Daylight Savings Time.

Use Default NTP Servers: If this is enabled, then time is updated regularly by contacting

preconfigured default public NTP Servers on the Internet.