System information

EAP3000 Users Manual

Version: 1.2

Issue Date: June 12, 2010

request packet to the destination. If the destination IP address is active, you can see a response

similar to “64 bytes from IP_Address: icmp……”. A “response timed out” message indicates that the

destination is either not active or is blocking ping requests.

The results of the ping operation will be loaded in the current page. To return to the Diagnostics

page, click on the back button of your browser.

System Options

Reboot the System: Click Reboot to restart the device from the web interface.

Note: All active connections to the AP and the connections going through the AP to the LAN will be

disconnected while the restart is in progress.

Management -> Users

The Users page is used to change the system passwords for Administrator and Guest users.

Note: This password is used to login to the device and is NOT the same as the account password

provided by your ISP.

User Selection

To change administrator credentials, click Edit Admin Settings. To change guest user settings,

click Edit Guest Settings.

Admin Settings

This section allows you to change the settings for the account with administrator privileges. The

following fields must be entered:

Old Password: Type in the current password.

New Password: Type in a new password

Retype New Password: Confirm the new password by re-entering it.

Guest Settings

This section allows you to change the settings of the guest user. The following fields must be

entered:

Old Password: Type in the current password.

New Password: Type the new password

Retype New Password: Confirm the new password by retyping it again.

Click Apply to save your changes.